A glass-cleaning spray may be within reach when a bar’s acrylic bottle display looks smeared. Before using it, check what that cleaner is meant for. Acrylic can be scratched by a gritty cloth or develop fine cracks after contact with an incompatible chemical. More rubbing won’t necessarily restore the surface.
Longstar describes its LED bottle display as an acrylic-and-metal construction. Caring for the acrylic is part of keeping the display presentable between services. Guidance for a bare sheet, however, doesn’t establish how to wash the complete powered unit.
The cloth matters before the cleaner
For a surface approved for damp wiping, start with a clean, soft, lint-free cloth lightly moistened with water. Keep a separate cloth for the acrylic so a towel used elsewhere doesn’t carry debris onto it. ACRYLITE warns that dry or gritty cloths can scratch its sheet surface. Use light pressure.
PLEXIGLAS recommends a little dishwashing detergent when needed for its acrylic and warns against rubbing it completely dry. That action can create static charge, attracting more dust, as well as causing scratches. Chasing every speck with a dry towel can make the job harder.

A familiar spray still needs approval
ACRYLITE’s care guidance warns that incompatible cleaners can weaken acrylic and cause crazing, the development of fine surface cracks. These marks aren’t simply dirt waiting for a stronger cleaner. It specifically cautions against ordinary window sprays and scouring compounds.
Formulation matters. The same guidance permits certain diluted cleaning solutions while rejecting other products. Use a cleaner approved for the exact panel and any printed decoration. A familiar ingredient name alone doesn’t establish compatibility. The sheet brands’ advice explains the material issue; it doesn’t identify the acrylic grade or finish on a Longstar order.
Treat the powered assembly separately
Remove the bottles and switch the display off before maintenance. Disconnect it from charging. Follow the supplied product instructions for moisture exposure around controls and charging connections, separately from the choice of cleaner for the panel.
A sheet-care instruction to rinse acrylic isn’t a washing instruction for the assembled display. Keep moisture controlled at the cloth and use the cleaning method approved for the complete unit. Obtain specific care instructions for a decorated or coated surface before using a polish or an unfamiliar chemical.
When a mark survives gentle cleaning
Inspect the surface after the approved cleaning process. A persistent cloudy patch calls for inspection before another cleaner is applied.
The Canadian Conservation Institute notes that only very fine, shallow scratches may be removed by polishing, and that the work can be laborious. It recommends comparing that effort with replacement. On a finished illuminated display, let the fabricator assess whether the affected panel can be refinished without disturbing its decoration or assembly. Record the cleaner already used so the inspection starts with that information.
References
Longstar Gifts, LS-BD02 LED Bottle Display
ACRYLITE, Clean Disinfect and Maintain Acrylic Sheet
PLEXIGLAS, Cleaning Maintaining and Disinfecting Correctly
Canadian Conservation Institute, Cleaning Glass and Acrylic Display Cases
Post time: Nov-17-2026






