Your registration team already has the badges. The new LED lanyards arrive, and the clasp will go through the holder’s slot, but it won’t close once the plastic sits inside it. Now someone has to find replacement holders or add an extra fitting before check-in. You can catch that mismatch while the lanyard is still a sample.
Longstar’s custom LED lanyard page for the LS-NY01 describes badge holding and lists options for logo, color and pattern. To confirm fit for your order, send the supplier the holder you plan to reuse with its usual insert in place. If you start with a drawing, show the opening and its location as well as the outside dimensions.

The clasp has to close
A holder’s advertised size usually tells you which insert it takes. Avery’s 74472, for example, is a vertical holder for a 4-by-3-inch insert and comes pre-punched for attachments. Those dimensions give you the badge format. To size the attachment, look at the width and height of the opening and the thickness of the material the clasp has to go around.
Look at the rim around the opening, too. A rigid holder may have a raised rim that takes up some of the room inside the clasp. If a flat drawing leaves that profile unclear, a side photo or the physical holder helps the supplier see what the clasp must clear.
Try the proposed clasp on a loaded holder. Check that it goes through without forcing the plastic and that the gate closes fully when the badge hangs. If the supplier proposes an intermediate loop, include it on the sample. It adds another connection and can change where the badge sits on the wearer.
See which way the badge hangs
Clip the sample on and then let the badge fall into its normal position. Can someone in front of you read it? A holder with a single attachment point can turn as the wearer moves. If a wide pass needs to face forward, a two-point attachment is worth trying. Double-ended exhibition lanyards use a clip at each side to help keep the card facing out. That arrangement needs a holder with matching attachment points. Ask the supplier which attachment it can provide on the quoted LED model.
Leave the access card intact
If the badge is also a contactless credential, check the card maker’s instructions before anyone punches it to fit a hook. HID identifies certain dual high-frequency credentials that lack a slot-punch option because of their antenna design. Its guide calls for a separate holder on those cards. Fit the lanyard to the holder and ask the credential team to try the assembled badge on the reader they use at the venue.
For the factory sample, name the holder and attachment on the same order line as the lanyard, and keep a photo of the assembled sample. A team reusing both a rigid staff pass and a soft visitor sleeve should try both. Two inserts can be the same size while the holders leave different amounts of room for the clasp.
Longstar Gifts, LS-NY01 LED Lanyard
Avery, Heavy Duty Badge Holders 74472
USA Lanyards, Double Open-Ended Lanyards
HID, Readers and Credentials How to Order Guide, Rev. E.2 (January 2026)
Post time: Nov-19-2026






